Reversible Jasmine Bra – Tutorial

In the comments on my blogpost about Ohhh Lulu’s Jasmine Bra back in March I got a request for a tutorial to show how I made it reversible. And finally, 4 months later (oops!), here it is! (Warning, picture heavy post ahead!)

It is a rather easy and straight-forward process, with a fiddly bit towards the end. Steps 1 and 2 are the same as in the instructions, but instead of using a lining fabric, use a second fashion fabric. At step 3 sew all vertical seams on both fabrics, except the back seam, like it says in the instructions. Then there is the trick of making it reversible. First, baste the elastics to one of the fabrics along the upper and lower edge, with the picot edge facing towards the inside of the pattern pieces, like this:

Elastic on Upper Edge – facing inwards

Don’t forget to slightly pull the elastic on the lower edge to let the bra sit snugly there. It should look something like this:

One Side of Reversible Bra

Now attach the straps to this layer, following the instructions of the pattern. (I just used the same elastic cut to the desired length.) Sew the other fashion fabric to this layer along upper edge, right sides facing, like this:

Sew Bra Shells Together – right sides facing

Then sew the center back seam and check the fit. I do it this way to ensure it’s completely reversible. Plus, I’m too lazy to source bra closures. (I would recommend making a non-reversible muslin first, though. Less work wasted if the cups are off!) If it’s too loose, just take that seam in. If it’s too tight… Well… Go ahead and swear…

Then turn right sides out, give the upper edge a good press (I do this in 2 steps to get a crisper edge) and topstitch (with a zigzag or other stretchy stitch) to keep both layers in place.

So far, so easy… Now the fiddly bit. First, turn and press the lower edge so the elastic shows on the right side, like so:

Turn And Press Lower Edge

Then, on the other fashion fabric, turn under the lower edge seam allowance:

Turn Under Seam Allowance

And pin to the other fabric and elastic:

Pin to Elastic And Other Fashion Fabric

I use a lot of pins, but the safest and neatest way would be to hand-baste all the layers together. Then it’s time for the last step: topstitch carefully, as you did with the upper edge.

Topstitch Lower Edge to Elastic

Tadaa! You’re done! A reversible bralette:

Reversible Jasmine Bralette – Wild side

Reversible Jasmine Bralette – Solid side

And here’s the proof it’s all the same bra:

Reversible Jasmine Bra – Back view

That’s it, I hope this was helpful! If something is still unclear, let me know, I’ll try and explain. Have a good one!

Giveaway Winner

Just a quick post announcing the winner of my 51 posts giveaway.

I had 5 entries for the giveaway, and used the random number generator. Here’s what it showed:

Therefore the winner is:

Giveaway winnerCongratulations Claire! I already sent you an email.

Sorry for the others! Have a good day nonetheless!